Sanyo VPC-E1403, Instruction Manual

Page: 15 / 67

14
4. Close and lock the battery/memory card compartment
Inserting an SD/SDHC Memory Card
Expand your camera’s storage by using SD or SDHC memory
cards.
1. Unlock and open the Battery/memory card compartment at
the bottom of the camera.
2. Insert the SD/SDHC card into the memory card slot with the
metallic part facing the front side of the camera.
3. Push the SD/SDHC card into the memory slot until it clicks
into place.
4. Close and lock the Battery/memory card compartment.
To remove the SD/SDHC card
1. Unlock and open the Battery/memory card compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
Charging the Battery
The battery is not charged when you purchase the camera. You need to charge the battery before using
the camera.
1. Place the battery in the charger as shown.
2. Plug it into a power outlet.
• The light of the LED on the charger is orange when
charging is started and lights green when charging is
completed.
• It is recommended that you fully discharge the battery
before recharging.
• Charging time varies according to the ambient
temperature and the status of battery.
The battery may feel warm after it has been charged or immediately after being used.
This is normal and not a malfunction.
When using the camera in cold areas, keep the camera and battery warm by holding
them inside your outer clothes.