SPECIFICATIONS
Pickup device
:
1/4"
Effective pixels
:
752 (H) x 582 (V)
Horizontal resolution
:
Over 520 TV lines
Lens
:
x22 zoom lens, f=3.6 – 79.2mm (F1.6 – 3.8)
Electronic zoom and gearing
Zoom speed setting possible
Electronic zoom
:
16 power (combined with optic zoom gives
352 power max)
Max zoom magnification setting possible
Vertical resolution ON/OFF setting
Autofocus
:
AUTO/MANUAL
AF area setting possible (3 step)
Iris control
:
AUTO/MANUAL, 1/2 EV steps
Synchronization method
:
Internal synchronization/Line lock,
V phase adjustment possible
Lowest image illumination
:
1.2 lx (F1.6, AGC gain at maximum, COLOR
mode)
0.06 lx (F1.6, B/W mode)
0.04 lx (F1.6, x32 electronic sensitivity
increased, COLOR mode)
0.002 lx (F1.6, x32 SENSE UP, B/W mode)
S/N
:
Over 48dB
Backlight compensation
:
Multi-spot evaluative metering
5 spot centerweighted average metering
48 multi-spot metering
Day/Night
:
AUTO / COLOR / B/W settings available
Electronic shutter
:
•
Fast shutter speed mode (SHORT);
1/50, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
•
Slow shutter speed mode (LONG);
x1, x2, x4, x8, x16, x32
Electronic sensitivity
boosting
:
AUTO/OFF, works with auto iris
Up to x32 max setting possible
White balance
:
ATW/AWC/MWB
AGC gain
:
OFF/–6/
±
0/+6/+9/+12/+15dB
Motion detector
:
ON/OFF, ON allows setting of detection
patterns on a 48 zone screen for 6 motion
settings (size, masking, sensitivity, zoom,
interval, alarm sign)
Privacy masking
:
ON/OFF, max of 4 masked locations
Password lock possible
Alarm input/output
(back panel control
terminals)
:
Alarm input: 1 (for external alarm switch)
Alarm output: 1 (for sending a signal to the
system controller or an alarm detection
device such as a buzzer)
Mirror image effect
:
Horizontally (H), vertically (V), horizontally
and vertically (HV)
Camera ID
:
ON/OFF, 16 characters
View settings
:
9 (0 – 8) screen files can be established, and
each file can set 7 capturing characteristics
such as iris
Communications
:
Coaxial control, RS-485
Operational
temperature/humidity
:
–10 – +50° C/below 90% RH
Power source
:
24 V AC, 50 Hz/12 – 15 V DC
Power consumption
:
4.5 W
Weight
:
380 g
SERVICE
This camera is a precision instruments and if treated with care,
will provide years of satisfactory performance. However, in the
event of a problem, the owner is advised not to attempt to make
repairs or open the cabinet. Servicing should always be referred to
your dealer or Sanyo Authorized Service Centre.
L5AD2/XE (VCC-ZM400P) GB 2003, 1, 31
Eng
lish
64
