PLC-XW200/250 Expand Serial Command Functional Specifications
44 / 64
9.5 PC Adjust Status Read Command
9.5.1
CR_FSYNC Command
Command "CR_FSYNC”[CR]
Details
Get Fine Sync value
Response
Acceptable
“000_%a”[CR]
%a
“0000”~“0031”
Unacceptable
“Error Code”[CR] ----- When the command is invalid due to
condition such as Input source
9.5.2
CR_TDOTS Command
Command “CR_TDOTS”[CR]
Details
Get Total Dots value
Response
Acceptable
“000_%a”[CR]
%a
“nnnn”~“mmmm”
(nnnn = Display Dots + Horizontal Position)
(mmmm= Maximum value depends on input signal)
Unacceptable
“Error Code”[CR] -------- When the command is invalid due to
condition such as Input source
9.5.3
CR_CLAMP Command
Command “CR_CLAMP”[CR]
Details
Get Clamp value
Response
Acceptable
“000_%a”[CR]
%a
“0001”~“nnnn”
(“nnnn” depends on input signal)
Unacceptable
“Error Code”[CR] -------- When the command is invalid due to
condition such as Input source
9.5.4
CR_H – POS Command
Command “CR_H
-
POS”[CR]
Details
Get Horizontal Position value
Response
Acceptable
“000_%a”[CR]
%a
“0000”~“nnnn”
(nnnn = Total Dots - Display Dots)
Unacceptable
“Error Code”[CR] -------- When the command is invalid due to
condition such as Input source
9.5.5
CR_V – POS Command
Command “CR_V
-
POS”[CR]
Details
Get Vertical Position value
Response
Acceptable
“000_%a”[CR]
%a
“0000”~“nnnn”
(nnnn = Total Line - Display Line)
Unacceptable
“Error Code”[CR] -------- When the command is invalid due to
condition such as Input source
