PLC-XW200/250 Expand Serial Command Functional Specifications
25 / 64
8.7 Screen Control Command
8.7.1
CF_SCREEN Command
Command “CF_SCREEN_%1”[CR]
%1
Input is
Computer
“NORMAL” ---------------------- Select Normal size
“TRUE” -------------------------- Select True size
“WIDE” -------------------------- Select Wide size
“FULL” --------------------------- Select Full screen size
“CUSTOM” ---------------------- Select Custom size
“DZOOM_UP” ----------------- Expand image size with Digital Zoom
“DZOOM_DN” ----------------- Reduce image size with Digital Zoom
“UP” ------------------------------ Switch selectable screen size in
positive order
(Normal
→
True
→
Wide
→
Full
→
Custom
→
Normal)
“DN” ------------------------------- Switch selectable screen size in
negative order
(Normal
→
Custom
→
Full
→
Wide
→
True
→
Normal
）
Input is
Video
“NORMAL” ---------------------- Select Normal mode
“WIDE” --------------------------- Select Wide mode
“CUSTOM” ---------------------- Select Custom size
“UP” ------------------------------Switch selectable screen size in
positive order
(Normal
→
Wide
→
Custom
→
Normal)
“DN” -------------------------------Switch selectable screen size in
negative order
(Normal
→
Custom
→
Wide
→
Normal)
Details
Select image size on screen.
When Input specified by %1 is inappropriate for selected Input, the projector
returns “101” [CR] and the command is not executed.
“DZOOM UP” and “DZOOM DN” start effecting from the first command.
This command is available in normal Power ON status.
Note) When Input is computer and AV sorts signals (480i / 575i…etc) are entered,
the signal recognized as Video Input.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.7.2
CF_DZCENT Command
Command “CF_DZCENT_%1”[CR]
%1
”CENT” ---- Cancel Digital Zoom (CENT: “CENTER”)
Details
Cancel Digital Zoom
When image is expanded or shrunk, reset its value.
This command is available in normal Power ON status and when Input is
Computer.
Response
Acceptable
“000”[CR]
Unacceptable “101”[CR] ------ when Input for Video is selected
8.7.3
CF_KEYSTONE Command
Command “CF_KEYSTONE_%1”[CR]
%1
“UP” ------------- Correct Keystone distortion to reduce upper part of image
“FUP” ----------- Correct Keystone distortion to reduce upper part by 2steps
“DN” ------------- Correct Keystone distortion to reduce lower part of image
“FDN” ----------- Correct Keystone distortion to reduce lower part by 2steps
“RST” ------------ Set Keystone OFF
Details
Change Keystone distortion correction
This command is available in normal Power ON status.
