PLC-XW200/250 Expand Serial Command Functional Specifications
10 / 64
5.5 Lamp Command Table
Execute command
Item
CF_LAMPH_%1[CR]
Reset total running time of each lamp
CF_LAMPMODE_%1[CR]
Select Lamp mode
CF_LAMPLIFECONTRL_%1[CR]
Select Lamp life mode
5.6 Sound Command Table
Execute command
Item
CF_VOLUME_%1[CR]
Set Volume value
CF_MUTE_%1[CR]
Control ON/OFF of Sound Mute
5.7 Setting Command Table
Execute command
Item
CF_LANG_%1[CR]
Select language for OSD
CF_MENUPOSITION_%1[CR]
Move menu position.
CF_INPUTSEARCH_%1[CR]
Set up Input search function
CF_AUTOSETUPPCADJ_%1[CR]
Set Auto PC in Auto Setup
CF_AUTOSETUPKEYSTONE_%1[CR]
Set Auto Keystone in Auto Setup
CF_AUTOSETUP_%1[CR]
Excute Auto Setup
CF_BACKGND_%1[CR]
Set screen mode for the case of no signal
CF_DISP_%1[CR]
Set Display function
CF_LOGO_%1_%2[CR]
Set Logo function
CF_CEIL_%1[CR]
Set Ceiling function
CF_REAR_%1[CR]
Set Rear function
CF_TERMINAL_%1[CR]
Set Terminal function
CF_STANDBYMODE_%1[CR]
Set Standby Mode
CF_P-MANE_%1[CR]
Set Power management function
CF_P-MANETIME_%1[CR]
Set Power management time
CF_ON-STA_%1[CR]
Set Power ON Start function
CF_RCODE_%1[CR]
Select Remote Control Reception Code
CF_KEYDIS_%1[CR]
Disable RC/Projector keys
CF_PJPINCODE_%1[CR]
Input PIN code to release PJ Locj
CF_FANMODE_%1[CR]
Select Fan mode
CF_FANCONTROL_%1[CR]
Select Fan control mode
CF_CCAPTIONDISP_%1[CR]
Set channel of Closed caption
CF_CCAPTIONCOLOR_%1[CR]
Set color of Closed caption
CF_FILTIMER_%1[CR]
Set time when Filter warning OSD is displayed
CF_FILH_%1[CR]
Reset Filter used time
CF_FDEFAULT_%1[CR]
Set the value to Factory Default
5.8 Other Command Table
Execute command
Item
CF_KEYEMU_%1[CR]
Behave the same as corresponding key of
projector top panel
CF_MENU_%1[CR]
Switch ON/OFF of each Menu.
CF_POWER_%1[CR]
Switch ON/OFF of Power.
CF_FREEZE _%1[CR]
Set Freezefunction.
CF_VMUTE _%1[CR]
Set No show function.
CF_PTIMER _%1[CR]
Set P-Timer function.
