Sanyo PLC-XU106 Service Manual Download Page 57 | Manualshive

Page: 57 / 110

background image

-57-

Check the indicators for projector condition.

• • • green

• • • red

• • • off

• • • blinks green

Q

When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When

this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replace-
ment counter after replacement of the lamp.

Indicators and Projector Condition

• • • blinks red

Troubleshooting

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the POWER ON/STAND-
BY button to turn on the projector.

Projector condition

POWER

red/green

Indicators

LAMP

REPLACE

yellow

WARNING

red

Q

The projector is preparing for stand-by or the projection lamp is
being cooled down. The projector cannot be turned on until cooling
is completed and the POWER indicator stops blinking.

Q

The  temperature  inside  the  projector  is  abnormally  high.  The
projector  cannot  be  turned  on. When  the  projector  is  cooled  down
enough  and  the  temperature  returns  to  normal,  the  POWER
indicator  stops  blinking  and  the  projector  can  be  turned  on.  (The
WARNING indicator keeps blinking.)

Q

The projector detects an abnormal condition and cannot be turned
on.  Unplug  the  AC  power  cord  and  plug  it  again  to  turn  on  the
projector.  If  the  projector  is  turned  off  again,  unplug  the  AC  power
cord  and  contact  the  dealer  or  the  service  center  for  service  and
checkup.  Do  not  leave  the  projector  on.  It  may  cause  an  electric
shock or a fire hazard.

Q

The projector is operating normally.

Q

The projector is in the Power management mode.

Q

Q

The projector has been cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING
indicator stops blinking. Check and clean the air filter.

«
...
55
56
57
58
59
...
»

Summary of Contents for PLC-XU106















































































































Reviews:

No comments

Related manuals for PLC-XU106

Brand: Barco Pages: 2

I-SP1T-10SMD750

Brand: i-WATTS Pages: 15

Roll Away R6500 Series

Brand: R. Lang Company Pages: 6

PJ1165 - XGA LCD Projector

Brand: ViewSonic Pages: 52

Brand: Christie Pages: 158

POCKETBEAM TOUCH 2

Brand: Merlin Pages: 4

Brand: Miroir Pages: 36

Brand: Panasonic Pages: 323

Brand: Panasonic Pages: 240

Brand: Acer Pages: 54

Brand: Epson Pages: 6

Brand: Epson Pages: 42

Brand: Epson Pages: 7

Brand: Epson Pages: 203

Brand: Epson Pages: 121

Brand: Epson Pages: 210

EasyMP Network Projection

Brand: Epson Pages: 109

Brand: Epson Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands