-5-
Optical Adjustments
Fig.2-2
Moving of Slot d
c
y
x
White
Slot d
White
1
Turn the projector on and input an all-white signal.
2
Adjust the adjustment base of integrator lens assy to make color
uniformity in white.
1) If the shading appears on the left or right of the screen as shown
in
Fig.2-1
, loosen 1 screw
A
, and adjust the slot
B
to make
color uniformity in white by using a slot screwdriver.
) If the shading appears on the top or bottom of the screen as
shown in
Fig.2-2
, loosen screws
c
, and insert a slot screw-
driver into the slot
d
and adjust color uniformity in white by turn-
ing a slot screwdriver up or down.
3
Tighten screws
A
and
c
to fix the Integrator lens unit.
Note:
The relay lens adjustment must be carried out after completing this
adjustment.
Integrator lens adjustment
a
b
Moving of slot B
Fig.2-1
Slot B
A
a
b
y
x
Summary of Contents for PLC-XU106
Page 62: ... 62 IC Block Diagrams FA5550NG P F Control IC621 LC87F2G08A5AN6 UART IC9885 ...
Page 63: ... 63 IC Block Diagrams MAX232ECPWRP RS 232C Driver IC3801 MR4010 Power OSC IC631 ...
Page 65: ... 65 IC Block Diagrams L3E07111 LCD Driver Gamma Correction IC401 PW190 Scaler IC301 ...
Page 94: ... KB8AC October 2009 DC 200 Printed in Japan SANYO Electric Co Ltd ...
