Sanyo PLC-XE33, Service Manual, Page: 46 / 110

-46-
Electrical Adjustments
Group/
Item
Item Name Function Initial range Note
7 Eco Fan Max 110 110 115 115 0-55
Group
255
Fan Start/cooling Setting
0 Fan1 Initial Volt
Fan Start Voltage(0.1V)
55 0-55
1 Fan Initial Volt 55 0-55
Fan Initial Volt 55 0-55
4 Fan1 Cooling Speed
Fan Voltage at Power Off (0.1V)
10 0-55
5 Fan Cooling Speed 10 0-55
6 Fan Cooling Speed 10 0-55
8 Cooling Time L1
Cooling Time setting at Fan Mode L1 (x
0 sec)
1: 0, : 90, 15: 450 sec.
0-15
9 Cooling Time L
Cooling Time setting at Fan Mode L (x
0 sec)
1: 0, : 90, 15: 450 sec.
0-15
10 Temp Error Cooling Time
Cooling Time setting at Temp Erro (x 0
sec)
0-15
11 OnStart Cooling Start Thresh-
old
8 0-100
1 After shutdown cooling Cooling after shutdown (0: No, 1: Yes) 1 0-1
Group
257
Fan dimmer Setting
0 Dimmer Average Chech
Period
Dimmer Average measurement Time
(0:10sec. 1:0sec. :60 sec. 90:
sec...10:0sec.)
0 0-10
1 Dimmer Average Dimmer Average Value (Read only) -
Last Voltage Difference -
Voltage Difference Goal -
Group
260
Auto calibration(common)*Auto calibration
0 Execute Calibration 0 0 - 1
Executes Auto-Calibration when
changiing the Value (PC White
100%)
1 Loop Count
Maximum Execution Times (OFFSET-
>GAIN)
10 1 - 0
Auto Status
Result of Auto-Calibration (Last
Memory)
0 0 / 1 / 9
0: OK, 1: Adjusting,9: Error *
ReadOnly
AutoWait Wait Value for each setting 1 1 - 0
4 CHECK -Tolelance Torelance of OFFSET 1 - 55
Group
261
Auto calibration (rGB)
0 OFFSET AREA H START
Black Level Acquiring Area H-Start
Position
975 0-1000
1 OFFSET AREA V START
Black Level Acquiring Area V-Start
Position
500 0-1000
GAIN AREA H START
White Level Acquiring Area H-Start
Position
5 0-1000
GAIN AREA V START
White Level Acquiring Area V-Start
Position
500 0-1000
4 Image AREA H WIDTH Black/White Level Acquiring Area 1 0-4095
5 Image AREA V HIGHT
Black/White Level Acquiring Area
Height
9 0-4095
6 OFFSET target Target Value of Black Level Adj. 0-17
7 OFFSET torelance Torelance of Black Level Adj. 1 1-17
8 GAIN target Target Value of White Level Adj. 8 0-55
9 GAIN torelance Torelance of White Level Adj. 1 1-55
Group
262
Auto calibration (cVBS/SVIdeo)
0 Y Image Area Start X Y Acquiring Area H-Start Position 0 0-1000
1 Y Image Area Start Y Y Acquiring Area V-Start Position 00 0-1000
Cb Imange Area Start X Cb Acquiring Area H-Start Position 500 0-1000
Cb Imange Area Start Y Cb Acquiring Area V-Start Position 00 0-1000
4 Cr Imange Area Start X Cr Acquiring Area H-Start Position 500 0-1000
5 Cr Imange Area Start Y Cr Acquiring Area V-Start Position 00 0-1000
6 Image Area H Width Image Level Acquiring Area 8 0-4095
7 Image Area V Hight Image Level Acquiring Area Height 9 0-4095
8 Y Target Level Target Value of Y Level Adj. 17 0-55
9 Cb Target Level Target Value of Cb Level Adj. 1 0-55