Sanyo PLC-XE33, Service Manual, Page: 12 / 110

-1-
z
cabinet top, r/c Board removal
Mechanical Disassembly
Mechanical disassembly should be made following procedures in numerical or-
der.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause loss of performance and product safety.
Screws Expression
(Type
Diameter x Length
) mm
T type M Type
B (Mx8)x4
R/C Board
Fig.1
Cabinet top
D (TX8)x
1. Loose screw A (Mx8 ) to remove the Lamp Cover.
. Remove 4 screws B (Mx8 ) and screws C(Tx10) to re-
move the Cabinet top.
. Remove the Control Buttons and Dec Inlay LED.
4. Remove screws D (Tx8) to remove the Dec Ring.
5. Remove the R/C Board.
Control Buttons
Lamp Cover
A (Mx8)
B
B
B
D
Dec Ring
C
Dec Inlay LED
C (TX10)x
Dec Inlay RC