Sanyo PLC-XE33, Service Manual, Page: 16 / 110

-16-
Mechanical Disassembly
Fig.5
b
Power board, Fan(FN002) and Filter removal
Power board
spacer sheet
1. Remove the Power board spacer sheet.
. Remove screws A(Mx8) and screws B(M4x6) to remove the Power shield.
. Remove the thermal switch(SW601). Remove 6 screws C(Tx8) to remove the Power board
holder and the fan(FN00).
4. Remove screw D(Tx8) to remove the Power board.
5. Remove screws E(Tx8) to remove the Lamp Ballast.
6. Remove the Panel net front and Panel net back.
FN00
Power shield
C(Tx8)x6
C
Panel net front
Power board
A (Mx8)x
A
Power board holder
C
C
C
C
Lamp Ballast
Panel net back
D(Tx8)
E(Tx8)x
E
E
SW601
Note:
Please pay attention to the install
direction of SW601, the side with
text facing to the projector back.
B (M4x6)x
B
The exhaust side facing
to the screening shield.