Sanyo PLC-EF10B, Service Manual

Page: 23 / 102

000 DAC RED CENTRE 00B1
✻
0000 ~ 00FE
001 DAC GREEN CENTRE 00B1
✻
0000 ~ 00FE
002 DAC BLUE CENTRE 00B1
✻
0000 ~ 00FE
003 DAC2 PSIG 0060
✻
0000 ~ 00FF
004 DAC2 PSIG 0090
✻
0000 ~ 00FF
005 D-G RED Sub-Bright for PC FFD9
✻
FC00 ~ 03FF Digital-Gamma Red Sub-Bright
006 D-G RED Sub-Gain for PC 004E
✻
0000 ~ 00FF Digital-Gamma Red Sub-Gain
007 D-G GREEN Sub-Bright for PC FFD9
✻
FC00 ~ 03FF Digital-Gamma Green Sub-Bright
008 D-G GREEN Sub-Gain for PC 004E
✻
0000 ~ 00FF Digital-Gamma Green Sub-Gain
009 D-G BLUE Sub-Bright for PC FFD9
✻
FC00 ~ 03FF Digital-Gamma Blue Sub-Bright
00A D-G BLUE Sub-Gain for PC 004E
✻
0000 ~ 00FF Digital-Gamma Blue Sub-Gain
00B D-G RED Sub-Bright for AV FFBD
✻
FC00 ~ 03FF Digital-Gamma Red Sub-Bright
00C D-G RED Sub-Gain for AV 004E
✻
0000 ~ 00FF Digital-Gamma Red Sub-Gain
00D D-G GREEN Sub-Bright for AV FFBD
✻
FC00 ~ 03FF Digital-Gamma Green Sub-Bright
00E D-G GREEN Sub-Gain for AV 004E
✻
0000 ~ 00FF Digital-Gamma Green Sub-Gain
00F D-G BLUE Sub-Bright for AV FFBD
✻
FC00 ~ 03FF Digital-Gamma Blue Sub-Bright
010 D-G BLUE Sub-Gain for AV 004E
✻
0000 ~ 00FF Digital-Gamma Blue Sub-Gain
011 D-G GREEN Gamma Gain PC 007F
✻
012 D-G GREEN Gamma Bright PC 03FF
✻
013 D-G RED Gamma Gain PC 007F
✻
014 D-G RED Gamma Bright PC 03FF
✻
015 D-G BLUE Gamma Gain PC 007F
✻
016 D-G BLUE Gamma Bright PC 03FF
✻
017 D-G GREEN Gamma Gain AV 007F
✻
018 D-G GREEN Gamma Bright AV 03FF
✻
019 D-G RED Gamma Gain AV 007F
✻
01A D-G RED Gamma Bright AV 03FF
✻
01B D-G BLUE Gamma Gain AV 007F
✻
01C D-G BLUE Gamma Bright AV 03FF
✻
01D DAC RED DLYCNT 00A0 0000 ~ 00FF
01E DAC GREEN DLYCNT 00A0 0000 ~ 00FF
01F DAC BLUE DLYCNT 00A0 0000 ~ 00FF
020 DAC RED COM 0075
✻
0000 ~ 00FF
021 DAC GREEN COM 0075
✻
0000 ~ 00FF
022 DAC BLUE COM 0075
✻
0000 ~ 00FF
023 DAC RED OFFSET 00B3
✻
0000 ~ 00FF
024 DAC GREEN OFFSET 00B3
✻
0000 ~ 00FF
025 DAC BLUE OFFSET 00B3
✻
0000 ~ 00FF
026 DAC2(Colour uniformity comp.)data1 0100 0000 ~ 01FF
027 VCO Frequency Range-1 Set 0130 Dot Clock setting for PSD=3, PFD=5, Fbk_Sel=1
028 VCO Frequency Range-2 Set 0285 Dot Clock setting for PSD=3, PFD=6, Fbk_Sel=1
029 VCO Frequency Range-3 Set 0295 Dot Clock setting for PSD=3, PFD=7, Fbk_Sel=1
02A VCO Frequency Range-4 Set 0380 Dot Clock setting for PSD=2, PFD=6, Fbk_Sel=1
02B VCO Frequency Range-5 Set 0440 Dot Clock setting for PSD=2, PFD=7, Fbk_Sel=1
02C VCO Frequency Range-6 Set 1200 Dot Clock setting for PSD=1, PFD=6, Fbk_Sel=1
02D VCO Frequency Range-7 Set 1340 Dot Clock setting for PSD=1, PFD=7, Fbk_Sel=1
02E VCO Frequency Range-8 Set 2200 Dot Clock setting for PSD=0, PFD=6, Fbk_Sel=0
02F Auto Image Input Level Setting 0070 0000 ~ 00FF Decide Input signal level for Auto Image operation
030 DVCO 0D30
✻
VCO Default Adjustment of VPC (Auto tuning)
031 ondo_sw -- Auto Image
032 ondo_keisuu -- Auto Image
033 ondo_now -- Auto Image ( monitor only )
034 ondo_fsync -- Auto Image ( monitor only )
COMPUTER VIDEO
035 H Filter Look Up Table 0001 0001 0 ~ 9
036 V Filter Look Up Table 0001 0001 0 ~ 9
037 Lamp Life Remaining Time 0600 --- Read Only (Remaining time to Lamp Life in hours)
038 --
039 NEC Gate Array Gamma A 00C0 00C0
03A NEC Gate Array Gamma B 0060 0060
03B NEC Gate Array Gamma C 0020 0020
-23-
Electrical Adjustments
●
IIC Data Adjustment
The initial value is the reference data writing to the memory IC
by the CPU ROM when the memory IC replacing. The
Adjustment item which is indicated with “
✻
” is required to read-
justed in the “Electrical adjustments”. Other items should be
used in the initial data value.
No. Adjustment Item Range Initial Value Description