25
PC ADJUSTMENT
PC MODE ADJUSTMENT
"PC mode adjustment" menu is provided to adjust "Auto setup", "Clock", "Phase", "Position" and "Power save" to conform to
your computer. These function can be operated as follows:
Auto setup
COMPUTER MODE
Press MENU button and ON-SCREEN MENU will appear.
1
Press
ed
buttons to select "PC mode adjustment" menu, and
press OK button. "PC mode adjustment" menu will appear.
2
Press
ed
buttons to select the item that you want to adjust, and
press OK button. The selected item will appear.
3
This function automatically adjusts "Clock", "Phase" and "Position" to
conform to your computer.
To execute this function, press
7 8
buttons to select "Yes", and
press OK button.
NOTE :
●
In the following cases, the Plasma Monitor may not adjust itself
with this function.
1) If the picture is not displayed fully on the screen.
2) When a contrast picture, such as an outdoor scene, is
displayed on the screen.
●
Depending on signal and computer's configuration, this function
cannot be operated properly. In this case, adjust "Clock", "Phase"
and "Position" manually.
Adjust each level by pressing
7 8
buttons.
4
Clock
Adjust when Vertical noise lines are observed.
(Horizontal width will be changed by adjustment.)
Adjust with
7 8
buttons.
Phase
Adjust when Horizontal noise lines are observed.
Adjust with
7 8
buttons.
Position
Adjusts the screen position.
Adjust with
ed7 8
buttons.
PC MODE ADJUSTMENT MENU
BACK
: Back
: Select
MENU
: Exit
OK
: OK
Auto setup
Clock
Position
Power save
Phase
NOTE : This adjustment may be needed when a image becomes
unclear or flickering.
Yes
No
Proceed
BACK
: Back
: Select
MENU
: Exit
OK
: OK
BACK
: Back
: Adjust
MENU
: Exit
Clock
1344
BACK
: Back
: Adjust
MENU
: Exit
Phase
16
BACK
: Back
: Adjust
MENU
: Exit
Position
