33
Computer Input
Auto PC adjustment function is provided to automatically adjust
Fine sync
,
Total dots
,
Horizontal
,
Vertical
and
Clamp
position to conform to your computer.
PC adjust Menu
Auto PC adjustment
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a
Mode (1–10)
in
the PC System Menu (See page 32). See also “Store” on
page 35.
Note:
•
Fine sync
,
Total dots
,
Horizontal
and
Vertical
position of some computers can not be fully adjusted
with the Auto PC adjustment function. When the image
is not provided properly with this operation, manual
adjustments are required (pp.34-35).
• The Auto PC adjustment can not be operated when
480i
,
575i
,
480p
,
575p
,
720p
or
1080i
is selected in the
PC System Menu (p.32) , or when the signal is coming
from the HDMI terminal.
Press the MENU button to display the On-Screen
Menu. Use the Point
54
buttons to select
PC adjust
and then press the Point
or the SELECT button.
1
2
Use the Point
54
buttons to select
Auto PC adj.
and
then press the SELECT button.
Use Point
54
buttons
to select
Auto PC
adj.
and press the SELECT button.
Please wait...
appears while the Auto PC
adjustment is in process.
Menu Operation
Auto PC adj.
