45
Video Input
Use the Point
buttons to adjust the gamma value to
obtain a better balance of contrast (
Default
,
1.8
,
2.0
,
2.2
,
2.4
, or
2.6
).
Press the Point
button to decrease the sharpness of the
image; press the Point
button to increase the sharpness
of the image (from 0 to 15).
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off
......... Disabled.
L 1
......... For an active picture.
L 2
......... For a still picture.
Film
....... For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off
......... Disabled.
L 1
......... Lower reduction.
L 2
......... Higher reduction.
Note:
• Noise reduction and Progressive can not be selected when the input signal is
480p
,
575p
,
720p
or
3D
mode
is set to
On
.
•
Film
of Progressive cannot be selected when the input signal is
1080i
.
• When
480i
,
575i
,
480p
,
575p
,
720p
or
1080i
is selected in computer source, the items of Image adjustment
are the same as the items in video source, except for
Color
and
Tint
.
To reset the adjusted data, select
Reset
and press the
SELECT button. A confirmation box appears and then select
Yes
. All adjustments will return to their previous figures.
To store the adjusted data, select
Store
and press the Point
button or the SELECT button. Use the Point
54
buttons
to select one from Image 1 to 4 and press the SELECT
button.
A confirmation box appears and then select
Yes
. Stored
data can be called up by selecting an Image (1-4) in the
Image Mode Selection on page 43.
Store Menu
A confirmation box
appears and then
select
Yes.
Sharpness
Gamma
Noise reduction
Progressive
Reset
Store
