PDG-DWL2500 Expand Serial Command Functional Specifications
15/72
7. Error Code Table
Error Code
Details
?
-When the received data cannot be decoded
-Parameter determination error (digit number error, including invalid
value, etc.)
101
When the function selected is not available under current condition.
ex) When receiving signal-related commands while no signal is entered
102
Selected value is out of range (Not reflected)
103
Command mismatched to Hardware (command for Optional function
which is not installed)
201
When reached upper or lower limit of increasing or decreasing data
301
Command cannot be executed during capturing display.
302
Command cannot be executed during Auto setup operation.
402
Command cannot be executed during PIN code operation.
Note) These error codes are applied to Expand Command, not to Basic Command
