Sanyo PDG-DHT100L - DLP Projector - HD 1080p, Owner'S Manual

Page: 19 / 92

How to enter the numbers with the screen 10-key pallet
1.
Select a column with a red frame by using the point buttons
7 8
.
2.
Press SELECT button. The screen 10-key pallet appears on the screen.
3.
By using the point buttons(
d e 7 8
), select numbers 0 to 9 and press SELECT
button. By repeating the above to enter the complete number on the column.
*To change the number in a column, select “C” and press SELECT button to clear the num-
ber in the column and then enter the number again.
4.
After entering the number in the column, select a move key (
7 8 e d
) located on
the lower part of the pallet by using the point buttons and press
SELECT button
repeatedly to move the red frame.
5.
Repeat steps 3 to 4 for entering all the network address.
6.
After finishing, select “Exit” and press
SELECT
button. The 10-key pallet disap-
pears on the screen.
19
Network Board
OWNER’S MANUAL
ENGLISH
Exit
10-key pallet
For the Projector which provides the Network main menu
Network configuration