Sanyo KH1242 Instruction Manual Download Page 50

Page: 50 / 64

How to change programmed operation times

In the ordinary indicator mode, press the PROGRAM button.

Press the DAY button to move the operation reservation indicator (

) to the day the programmed operation

times of which you want to change.

Press the SET button.

By pressing the SET button, times indicators blink in turn in the order described below. Make the time to
change blink.

Press the HH or/and MM button to change the time.

Press the SET button.

Press the PROGRAM button to complete the change.

10. How to clear programmed operation

•

How to clear programmed days

Press the PROGRAM button.

Press the DAY button to move the operation reservation indicator (

) to the day the program of which should

be cleared.

Press the CLEAR button.
The programmed times for the day will turn off.

Press the PROGRAM button.
The operation reservation indicator (

) will turn off.

•

How to clear a program of a day

Press the PROGRAM button.

Press the DAY button to move the operation reservation indicator (

) to the day a program of which should

be cleared.

Press the SET button.

Press the SET button again to make the ON-time or OFF-time of the program to clear blink.

Press CLEAR button.
The program will be cleared and programs left will be automatically arranged to fill the cleared program.

Press the PROGRAM button.

OI-432-03 - 12EG

3 - 12

3 TM-SH80UG 5/2/01 3:21 PM Page 12

Summary of Contents for KH1242

































































Search results

Summary of Contents for KH1242

Reviews:

Related manuals for KH1242

Brands by name

Popular brands

Sanyo KH1242, Instruction Manual

Search results

Summary of Contents for KH1242

Reviews:

Related manuals for KH1242

Brands by name

Popular brands