■
How to start group operation
To start group operation
The flap setting can be performed only for units that have no remote
controllers.
NOTE
OI-432-04 - 8EG
4 - 8
Power
Turn the power supply switch on more than 5 hours before starting operation.
1
Press the SELECT button and select GROUP.
2
Select the ZONE No. including the group to be operated by pressing ZONE button.
3
Select the GROUP No. to be operated by pressing GROUP select buttons
.
4
Press the ON button.
5
Set the operation mode by pressing the MODE button.
6
Set the desired temperature by pressing one of the temperature setting buttons
.
7
Set the desired fan speed by pressing the FAN SPEED button.
8
Set the airflow direction to a specific angle or sweep mode.
9
By pressing
, select your desired setting.
Individual:
→
Controls with the remote controller are possible.
Central 1:
→
Individual ON/OFF operation with the remote controller is inhibited.
Central 2:
→
Individual ON/OFF, MODE, and Temp. setting operations with the remote
controller are inhibited.
Central 3:
→
Individual MODE and Temp. setting operations with the remote controller are
inhibited.
Central 4:
→
Individual MODE operation with the remote controller is inhibited.
• Under Central/Individual settings other than listed above, “CENTRAL” is displayed.
AUTO
Depending on the difference between the temperature setting and the room temperature,
Operation
heating and cooling alternate automatically so that a uniform room temperature is maintained.
Stop
Confirming the GROUP No. to be selected, press the OFF button.
8
9
1
2
5
6
7
3
Stop
4
4
4 SHA-KC64UG 5/2/01 2:30 PM Page 8
Summary of Contents for KH1242
