Sanyo KA-PN04, Owner'S Manual

Page: 43 / 56

43
Service Setting
To read Password or Address
1
Enter the service mode. (See a previous page)
2
Send a command (ASCII) of table1 to the Network Board.
3
The Network Board sends a return of table1 to your computer.
4
Exit the service mode.
✐
"_": Space
Item to read Command
(to Network Board)
Return
(to Computer)
Password "R_P" + [CR] "Password" + [CR]
IP Address "R_I" + [CR] "IP Address" + [CR]
Subnet Mask "R_N" + [CR] "Subnet Mask" + [CR]
Default Gateway "R_G" + [CR] "Default Gateway" + [CR]
DNS "R_D" + [CR] "DNS" + [CR]
To write New Password or Address
1
Enter the service mode. (See a previous page)
2
Send a command (ASCII) of table2 to the Network Board.
3
The Network Board sends a return of table2 to your computer.
4
Exit the service mode.
✐
"_": Space
✐
"XXXX": New Password (Must be typed 4 digits)
✐
"XXXXXXXXXXXX": New Address (Must be typed 12 digits)
Item to write Command
(to Network Board)
Return
(to Computer)
Password "W_PXXXX" + [CR] "XXXX" + [CR]
IP Address "W_IXXXXXXXXXXXX" + [CR] "XXXXXXXXXXXX" + [CR]
Subnet Mask "W_NXXXXXXXXXXXX" + [CR] "XXXXXXXXXXXX" + [CR]
Default Gateway "W_GXXXXXXXXXXXX" + [CR] "XXXXXXXXXXXX" + [CR]
DNS "W_DXXXXXXXXXXXX" + [CR] "XXXXXXXXXXXX" + [CR]
Table1
Table2
Example: New IP Address
"192.168.0.2"
➔
"W_I192168000002"
✐
Input of the command must be completed within 3 seconds . If the command has a long wording,
we recommend input with
"Copy & Paste"
for saving your time.