Sanyo ICR-1000, Instruction Manual

Page: 32 / 156

[ENGLISH]
GB-31
TROUBLESHOOTING GUIDE
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
The unit does not operate.
The batteries are discharged or not installed.
Insert two new “AAA/LR03/HP16” batteries.
“ ” and “LOW BATT” appear.
The batteries are discharged.
Insert two new “AAA/LR03/HP16” batteries.
“POWER OFF” appears when the operation button is pressed.
Hold function is set.
Slide the POWER switch to ON.
No sound.
The earphone is plugged in.
Unplug the earphone.
The volume is turned down completely.
Press the + VOLUME button to adjust the sound level.
Cannot erase.
The erase guard is set. (“ ” appears.)
Cancel the erase guard. Refer to “ERASE GUARD”.(See Page 24.)
“CANNOT INSERT” appears.
Insertion recording is not available.
“MEMORY FULL” appears.
The memory capacity is full.
Erase unnecessary files. Refer to “ERASING”. (See Page 20.)
“FILE FULL” appears.
Frequent “Insertion Recording” and “Partial Erasing” have been made
on one file.
Connect to your PC then save the backup data.