manualshive.com logo in svg

Sanyo HV-DX1E, Service Manual, Page: 79 / 130

Share
Download
Sanyo HV-DX1E Service Manual Download Page 79

DECK MECHANISM ADJUSTMENT

4-13

Purpose:To determine if the Mechanism is in the correct position, when a Tape is ejected.

1.Mechanism Alignment Position Check

1) Turn the Power S/W on and eject the Cassette by press-

ing the Eject Button.

2) Remove the Top Cover and Plate Assembly Top, visual-

ly check if the Gear Cam Hole is aligned with the
Chassis Hole as below Fig. C-2.

3) IF not, rotate the Shaft of the Loading Motor to either

Clockwise or Counterclockwise until the Alignment  is
as below Fig. C-2.

4) Remove the Screw which fixes the Deck Mechanism and

Main Frame and confirm if the Gear Cam is aligned with
the Gear Drive as below Fig. C-1(A).

5) Confirm if the Mode S/W on the Main P.C.Board is

aligned as below Fig. C-1(B).

6) Remount the Deck Mechanism on the Main P.C.Board

and check each operation.

Gear Cam

Gear Drive

(C)

Mode S/W

(B)

L/D Motor Assembly

Gear Cam

Chassis Hole

Gear Cam Hole

Gear Cam Hole

(A)

(B)

(A')

(B')

Test Equipment/ Fixture

• Blank tape

Test Conditions (Mechanism

Condition)

• Eject Mode (with Cassette ejected)

Check Point

• Mechanism and Mode Switch Position

Fig. C-1

Fig. C-2

CHECK DIAGRAM

BOTTOM VIEW

TOP VIEW

Gear Cam (

o

) and Gear Drive (

o

) groove alignment

Summary of Contents for HV-DX1E



































































































































Reviews:

No comments