manualshive.com logo in svg

Sanyo HV-DX1E, Service Manual, Page: 76 / 130

Share
Download
Sanyo HV-DX1E Service Manual Download Page 76

4-10

DECK MECHANISM DISASSEMBLY

Gear Assembly P3

Gear Assembly P2

Base Assembly P2

Base Assembly P3

(A)

(B)

Chassis

Gear assembly P2 Hole

Gear sector Hole(A)

Plate slider Hole(B)

Lever spring Boss

Gear assembly P3 Hole

Fig. A-8

29. Gear assembly P2 (Fig. A-8-1)/

Gear assembly P3 (Fig. A-8-2)/

1) Just lift the Gear assembly P2 up.
2) Just lift the Gear assembly P3 up.

When reassembling, align the two Holes of the Gear assem-
bly P2 and P3 in a straight line after confirmation whether the
Gear Sector Hole(A) and the Plate Slider Hole(B) are aligned
or not as Fig.

30. Base assembly P2 (Fig. A-8-3)/

Base assembly P3 (Fig. A-8-4)

1) Move the Base assembly P2 in direction of arrow(A)

along the Guided Hole of the Chassis and disassemble it
on bottom side.

2) Move the Base assembly P3 in direction of arrow(B)

along the Guided Hole of the Chassis and disassemble it
on bottom side.

Place the Mechanism face down, or return to original
position.

NOTE

(Fig. A-8-1)

(Fig. A-8-2)

(Fig. A-8-3)

(Fig. A-8-4)

Summary of Contents for HV-DX1E



































































































































Reviews:

No comments