manualshive.com logo in svg

Sanyo HV-DX1E, Service Manual, Page: 47 / 130

Share
Download
Sanyo HV-DX1E Service Manual Download Page 47

3-57

Does tray open or close?

Does the pick-up

slide inner or outer

track?

Fig.1. SLED Driver waveform

Fig.2. Focus Driver waveform

Does

the voltage change

at PMD03 Pins7, 8 more than

2V on the basis of

3.8V?

Pressing

the open/close key

repeatedly, check the voltage of IC2M1

Pins14, 15 change

0V to 5V

Does

PMD03 Pin10 change

high to low?

Does

the pick-up lens move up

and down?

Check Focus Driver output.

(IC201 Pin88, IC2M1 Pins37, 38)

Check SLED Driver output.

IC201 Pin80 IC2M1 Pins28, 29.

IC201 Pin80 no output : IC201 is defective
IC2M1 Pins26, 27 no output : IC2M1 is defective

IC201 Pin88 no output : IC201 is defective
IC2M1 Pins37, 38 no output : IC2M1 is defective

DECK assembly is defective.

Slide the pick-up to

inner track.

.Power on

Check loading Part.

Push Pick-up to inner track to

the end by hand.

DECK assembly is defective.

(Limit sw)

check µ-COM Part.

Replace IC2M1.

No disc

B.

END

NO

NO

NO

NO

NO

NO

YES

YES

YES

YES

YES

YES

Summary of Contents for HV-DX1E



































































































































Reviews:

No comments