INSTALLATION PARTS
1.
Bracket (L)
2. Bracket (R)
x l
X l
6. Tapping SCREW
7.
Nut
M 6
X 4
11.
Power Cable
Yellow
5mxl
x 4
WIRING
3. Bracket (B)
8.
seal
x l
4. Hexagonal bolt
9. Double sided tape
1. DIN cable
5. Hexagonal bolt
with washer
10.
cable
5mxl
Connect this cable to the
LB,
LB/FM
Modulator/Ground isolator or Divider unit.
2.
Power wire (YELLOW)
Connect this wire to a terminal which is always energized.
hen fuse replacement is necessary, use only a 5 amp fuse.
3. Ground wire (BLACK)
Attach this wire to the chassis of the car. Be sure that the surface
is free of paint, and is not rusty. If a proper ground connection is
not made, the CD changer may not operate correctly and stray
noise may be picked up by the unit.
l
Be sure to press this button when all wiring is completed or when
Car battery is replaced.
l
Press the reset button when a malfunction occurs during CD play
appears in the display).
T h e m a g a z i n e c o m e s o u t .
* If the magazine dose not come out or
often appear in the display, please contact the place of purchase.
5. Changer selector switch
Do not use this switch if only 1 CD changer is being used.
It is used only when 2 CD changers (FXD-C222) are attached.
On how to use it, refer to the operation manual of the divider unit
