Notes
l
When using a two-speaker installation, set the FADER control to the
position.
l
When not using a Power
Amplifier, cover the end of the Blue/Red wire with
electrical tape to prevent it from shorting to the unit or vehicle chassis.
l
When using a two-speaker installation, the Violet,
Green and White/Black wires,
which are used for a four-speaker installation, are not used. The ends of these wires must be cov-
ered with electrical tape to prevent them from shorting to the unit or vehicle chassis.
Fus
l
When fuse replacement is necessary, remove
the blown fuse by using pliers. Then install the
new
amp fuse.
LINE OUT/CD CHANGER
Only)
l
Since this unit has a CD changer controller and output terminals, you can use a CD changer and an amplifier
to upgrade your vehicle stereo system.
CD Changer DIN Socket
RCA Line-out Jacks
CD Changer
Rear Speaker
CD changer DIN Socket
l
Connect the DIN socket to the CD changer using
a
DIN cable (8 pin) which is supplied with the
(lo-disc)“, and the
CD changer.
RCA Line-out Jacks (For Rear Speakers)
l
nals of the external amplifier for the rear speakers.
