Sanyo CRD-BPDV2, Owner'S Manual

Page: 26 / 30

Page 25
Document No. Document Name
SANYO Electric Co., Ltd.
Notes for Handling
(1/5)
1. Don't look at the laser beam.
Don't look at the laser beam source.
If the laser beam hits your eyes, it might cause damage to your eyes.
2. Don't use deformed or cracked CDs and DVDs.
Don't use cracked, deformed CDs and DVDs or repaired CDs and DVDs with adhesives. As the
disc turns with high speed within the product, broken pieces might scatter and hurt you.
3. Don't touch the inside components of this product.
Don't disassemble or modify this product. It might cause the breakdown of this product.
4. Don't touch the connector parts.
If you touch the connector parts of this product, it might cause a contact fault or breakdown
because of the oil from your hands or static electricity. Also, don't touch the connector part on
the personal computer when this product is connected or disconnected.
5. Don't connect and disconnect this product excessively.
When this product is connected and disconnected repeatedly, the connector part becomes
heavily loaded and this might cause the breakdown of this product. Don't connect and
disconnect this product excessively, except for necessary cases.
6. How to prevent the breakdown
(1) Don't impact or vibrate this product.
(2) Keep the product where no fluid or alien substances can enter into this product.
(3) Don't use this product on an incline.
(4) Don't move this product with the disc inside.
7. Installation Place
Avoid the following places for using this product.
(1) Places of high temperature or greate changes in temperature.
(2) Places where sunlight can hit the product directly.
(3) Places with strong vibrations.
(4) Places with uneven surfaces.