32
REMOTE ACCESS
3 and then 1
Switch ON the Answering Machine and for
answering according to the Ring switch (at
bottom of base unit) setting. The MESSAGE
LED will be lit in green.
If the respective Outgoing message has not
been recorded previously, this command will
have no effect to the unit. After setting, it will
return to Remote Access mode.
3 and then 3
Switch OFF the Answering Machine. The
MESSAGE LED will be switched OFF.
7 and then 7
Delete all old messages (recorded from
telephone line or memo).
8
Room monitoring. This will switch on the
CLT-D14’ base microphone and you can
monitor from the telephone for 30 seconds.
After the 30 seconds, you will hear a beep
tone and it will return to Remote Access
mode, you can enter “ 8 ” again to continue
for another 30 seconds room monitor. You
can also leave the Room monitoring mode at
any time by entering “ 0 ” to return to Remote
Access mode.
When the remote operation is finished, simply terminate the call and
the answering machine will automatically drop the telephone line.
Note:
• During waiting for next command in remote access mode, do not
leave more than 8 seconds between key presses, or the machine
will drop the line.
• The phone will enter communication mode if you press “phone”
button during remote operation.
