20
HANDSET SETTING
System PIN number
The Sanyo DECT has built-in a system PIN which is used for
preventing misuse of certain features or accidental mis-programming
of certain features such as Baby Mode (described in the previous
section). The factory default setting for the Pin Number is 0000. You
can change it to any other four digits you can remember easily. If you
forget it, please consult your nearest Sanyo Service Centre.
To change the PIN number proceed as follows:
1. Press and then [1] key.
2. The screen shows "----" to prompt you to input the current PIN
(factory default is 0000).
3. Enter the current PIN number then followed by key.
4. The "----" will be shown again.
5. Enter the new 4 digit numeric PIN followed by key.
6. The "----" will be shown again.
7. Enter the new 4-digit numeric PIN followed by key again for
reconfirmation.
