Sanyo CLT-9965 Instruction Manual Download Page 45

Page: 45 / 52

The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary.

The first time you charge your handset, the security code is automatically set.
(See page E2.)

In the rare situation that you suspect another cordless telephone is using the same
security code, you can change the code.

Remove the handset from the base unit. Press and hold

PAGE/FIND

While holding

PAGE/FIND

, return the handset on the base

unit. The paging stops.
Leave the handset on the base more than 3 seconds.
A new security code is set.

ADDITIONAL

INFORMATION

If the handset battery pack is completely discharged or the battery pack is removed, the
digital security code will be lost. If this happens, a new security code is set automatically
the next time the battery pack is charged.

Note:

E41

Changing the digital security code

Out of Range

During a call, noise will increase if you move too far from
the base unit.

If you pass the range limits of the base unit, you will hear a
beep and

Out of Range

appears on the handset

display, your call will terminate within 30 seconds.

Talk 0:26

Out of Range

CLT9965 ENG-5/10 5/10/01 10:26 Page 41

Summary of Contents for CLT-9965




















































Search results

Summary of Contents for CLT-9965

Reviews:

Related manuals for CLT-9965

Brands by name

Popular brands

Sanyo CLT-9965, Instruction Manual

Search results

Summary of Contents for CLT-9965

Reviews:

Related manuals for CLT-9965

Brands by name

Popular brands