1
Press and hold
MEMORY
for about 3 seconds
until
Memory Store
is displayed.
A beep sounds.
2
Use
or
, or enter a two-digit number
(01–20) to select the memory location where you
would like to store the number.
3
Press
SELECT
.
The following screen appears and a cursor flashes
indicating that you can now enter the name.
If the following screen appears, the selected location
is already occupied. Then you can either change the
entry in this location, clear the location, or select
Go Back
to choose another location.
E17
The directory allows you to store up to 20 phone numbers/names in its memory. You can
dial a number in the directory using just a few key strokes.
#/
1
DELETE/SCAN
TONE/ /
0
*
REDIAL/PAUSE
Memory Store
01
02
Store Name
Edit Memory07
Delete Memory07
Go Back
4
Use
,
,
or
DELETE/SCAN
to enter the name.
The name cannot exceed 13 characters.
• Use
or
to scroll through the character menu. It contains upper and lower
case letters, numbers, and various characters.
• Use
and
to move the cursor to the desired location.
• Press briefly
DELETE/SCAN
to delete a character.
• Press and hold
DELETE/SCAN
to delete all numbers and characters at once.
DIRECTORY
In memory store operation,
you must press a key within
20 seconds, or the phone will
return to standby. If you return
the handset to the base, it will
return to standby, too.
Note:
Storing phone numbers and names
CLT9965 ENG-5/10 5/10/01 10:25 Page 17
