Sanyo CLT-9965 Instruction Manual Download Page 39

Page: 39 / 52

VOICE MAIL indicator

PAGE/FIND key

E35

To locate the handset

Press

PAGE/FIND

on the base less than 2 seconds.

The handset beeps for 5 seconds.
The following screen appears:

Press any key on the handset to stop paging.

Paging

• By holding

PAGE/FIND

for more than 2 seconds and up to 60 seconds, the handset beeps

for 60 seconds. If you press and hold for more than 60 seconds, the handset beeps until
you release the key.

• When a call is received during paging, paging stops and the handset rings.

• If you press

TALK/END

during paging, the handset turns into talk mode.

• Paging cannot be performed while the handset is in use.

Notes:

You may need to occasionally reset the

VOICE MAIL

indicator if it remains on after you have retrieved your
messages.

To reset the indicator, put the handset to the base then
press and hold the

PAGE/FIND

key for two seconds, or

until the indicator stops flashing.

Paging

ADVANCED CALLING

FEATURES

Resetting the message waiting indicator

To access your Voice Mailbox, press

MENU/SERVICE

and select

Voice mail

Then press

TALK/END

SPEAKER

on the handset.

with the MENU/SERVICE KEY

CLT9965 ENG-5/10 5/10/01 10:25 Page 35

Summary of Contents for CLT-9965




















































Search results

Summary of Contents for CLT-9965

Reviews:

Related manuals for CLT-9965

Brands by name

Popular brands

Sanyo CLT-9965, Instruction Manual

Search results

Summary of Contents for CLT-9965

Reviews:

Related manuals for CLT-9965

Brands by name

Popular brands