Sanyo CE42LM4N-NA - CE - 42" LCD Flat Panel Display Installation And Operation Manual Download Page 8

Page: 8 / 52

Installation

The following are instructions for attaching this product to the monitor and connecting it to

the network. Please review the entire procedure to become familiar with it.

Check package

(p.9)

Installation

(p.10-12)

Network configuration

(p.13-19)

Setting up is completed.

Please check the contents of a package. This product contains a network board,

and an ownerʼs manual (this manual). Also please check the nameand function of

1. Mount this product onto the monitor and connect the interface cable between this

product and the monitor.

2. Set the option switch on the monitor to down (Net-Organizer mode).

3. Connect the LAN cable and join it to the network.

Configure the network with the computer.

Flow of installation

The preparation is completed to control the monitor connected to the network. At next step,

set up and control the monitor via the network by using the web browser installed on your

computer. Please see “Basic setting and operation” on page

each part.

Summary of Contents for CE42LM4N-NA - CE - 42" LCD Flat Panel Display





















































Search results

Summary of Contents for CE42LM4N-NA - CE - 42" LCD Flat Panel Display

Reviews:

Related manuals for CE42LM4N-NA - CE - 42" LCD Flat Panel Display

Brands by name

Popular brands

Sanyo CE42LM4N-NA - CE - 42" LCD Flat Panel Display, Installation And Operation Manual

Search results

Summary of Contents for CE42LM4N-NA - CE - 42" LCD Flat Panel Display

Reviews:

Related manuals for CE42LM4N-NA - CE - 42" LCD Flat Panel Display

Brands by name

Popular brands