18
Configure the network of computer
Windows XP
This example explains how to set the following network address.
1
Select the
Control Panel menu from the [Start]
menu. Click the
Network and Internet
Connection and then click the Network on the
control panel.
2
Click the
Local Area Connection icon with right
button of the mouse and then select the
Property
menu. The right window will appear on the screen.
3
Select the
General tab on the "Local Area
Connection Properties" dialog window. Select the
Internet Protocol(TCP/IP)
*1
and then press the
Properties button.
4
On the "Internet Protocol (TCP/IP) Properties" dia-
log window, select the
Use the following IP
address button and then enter the IP address*
2
and Subnet mask.
5
Enter the Default gateway address.
✐
This setting is not needed if the network does not pro-
vide the gateway (router).
6
Click the
OK button, the setting window will be
closed.
IP Address
: 192.168.0.5
Subnet Mask
: 255.255.255.0
Gateway Address : 192.168.0.1
*1 Select the "TCP/IP" item of the LAN card you use. If the "TCP/IP" item is not listed in the column,
you need to install the TCP/IP protocol. For further information refer to the user's manual of your
computer.
*2 If the network already has the TCP/IP protocol set, enter with the same IP network number for the
IP address and Subnet mask.
*3 There are some ways to set up the network depending on your computer's appearances.
Summary of Contents for CE42LM4N-NA - CE - 42" LCD Flat Panel Display
