Sanyo CE42LM4N-NA - CE - 42" LCD Flat Panel Display, Installation And Operation Manual

Page: 6 / 52

6
Preparation
Recommended Operating Environment
To perform the management and setting up the monitor using this product, the environ-
ment described below is required.
The limitation of connection between this product and Hub or
Computer
Suitable LAN cables are limited by length and type as follows;
Connection Type of usable LAN cable Maximum length
PJ-Net Organizer - Hub UTP Straight Cable with category 3 or 5 100m
PJ-Net Organizer - Computer UTP Cross Cable with category 3 or 5 100m
✐
Category of LAN cable indicates the cable quality. Normally, cable with category 3 or 5 is used for
10Base-T network and cable with category 5 is used for 100Base-TX network.
✐
There may be other limitations depending on your network environment or LAN specification.
Please contact your network administrator for further details.
Operating System
Web Browser*
Plug-Ins
Computer
Environment
Network
Environment
Internet Mailer*
Windows 2000 sp4 or later
Windows XP sp2 or later
Internet Explorer version 6.0 or 7.0
* Used to control and set up the monitor. The layout of pages in
the browser may slightly differ from each type of application or
operating system you use.
Adobe Flash Player version 9,0, 28,0 or later
Network must handle Ethernet correctly and accept TCP/IP.
The computer must provide a 10Base-T or 100Base-TX network
card.
- Microsoft Outlook - Microsoft OutlookExpress
* Required the internet e-mail application software to receive an
e-mail alert sent from this product. If you do not use the func-
tion E-mail Alert, this application is not required.