Sanyo CAS-D6320 Instruction Manual Download Page 10

Page: 10 / 61

GETTING

STARTED

Connecting the Base and Charging the Handset

Connect the yellow-tipped AC adapter cord to the

DC IN 9V

jack.

Connect the AC adapter to a standard 120V AC wall outlet. DO
NOT use an AC outlet controlled by a wall switch.

Place the handset in the base with the LCD screen facing
forward.

Make sure that the

CHARGE

LED illuminates. If the LED does not

illuminate, check to see that the AC adapter is plugged in and
the handset makes good contact with the charging contacts.

Charge your handset at least 15 to 20 hours before plugging
into the phone line.

Notes:

Connect the AC adapter to a continuous power supply.
Place the base unit close to the AC outlet so that you can plug the AC adapter easily.
It is normal for the handset and base to get warm, when the handset is charging in the base unit.

•
•
•

IMPORTANT

Use only the supplied SANYO AC adapter. Do not use any other AC adapter.

Do not place the power cord so that it creates a trip hazard or where it could become damaged and create a fire or electrical hazard.

•
•

To AC outlet

AC adapter

(supplied)

To DC IN 9V

Route the cord.

To AC outlet

AC adapter

(supplied)

To DC IN 9V

Route the cord.

UC590EH.indd E8

8/19/2008 11:38:58 AM

Summary of Contents for CAS-D6320






























































Search results

Summary of Contents for CAS-D6320

Reviews:

Related manuals for CAS-D6320

Brands by name

Popular brands

Sanyo CAS-D6320, Instruction Manual

Search results

Summary of Contents for CAS-D6320

Reviews:

Related manuals for CAS-D6320

Brands by name

Popular brands