Sanyo CAS-D6320 Instruction Manual Download Page 11

Page: 11 / 61

GETTING

STARTED

Connecting the Charger

Connect the black-tipped AC adapter cord to the

DC IN 9V

jack and to

a standard 120V AC wall outlet.

Place the handset in the charger with the LCD screen facing forward.

Charge the handset battery pack for at least 15-20 hours before using
your new cordless telephone for the first time.

Connecting to the Phone Line

Once the battery pack is fully charged, connect the telephone cord to
the

TEL LINE

jack.

Connect the telephone cord to a telephone wall jack.

Testing the Connection

Try making a call. If your call does not connect or you cannot get a dial
tone, try the following steps:

Make sure the AC adapter cord is securely connected to the

DC IN 9V

jack and a standard power outlet.

Check to make sure the battery is fully charged. (If you don’t see
the “battery full” icon, check to make sure the battery is properly
connected).

Change the dial mode.

To AC outlet

To DC IN 9V

AC adapter (supplied)

Route the cord.

To AC outlet

To DC IN 9V

AC adapter (supplied)

Route the cord.

To telephone
wall jack

Modular cord
(supplied)

To TEL LINE

Route the cord.

To telephone
wall jack

Modular cord
(supplied)

To TEL LINE

UC590EH.indd E9

8/19/2008 11:38:58 AM

Summary of Contents for CAS-D6320






























































Search results

Summary of Contents for CAS-D6320

Reviews:

Related manuals for CAS-D6320

Brands by name

Popular brands

Sanyo CAS-D6320, Instruction Manual

Search results

Summary of Contents for CAS-D6320

Reviews:

Related manuals for CAS-D6320

Brands by name

Popular brands