Sanyo CAS-D6320 Instruction Manual Download Page 55 | Manualshive

Page: 55 / 61

background image

E53

ADDITIONAL

INFORMATION

I.C. Notice

TERMINAL EQUIPMENT
NOTICE:

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The
abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry
Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.

NOTICE:

The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment
provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not
exceed five.

RADIO EQUIPMENT

The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. “Privacy of communications may not be ensured when using this telephone”.

UC590EH.indd E53

UC590EH.indd E53

8/19/2008 11:39:14 AM

8/19/2008 11:39:14 AM

«
...
53
54
55
56
57
...
»

Summary of Contents for CAS-D6320






























































Reviews:

No comments

Related manuals for CAS-D6320

Brand: NEC Pages: 12

Brand: Panasonic Pages: 8

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Brand: Aastra Pages: 2

Dialog 4106 Basic

Brand: Aastra Pages: 2

Brand: EastLink Pages: 28

Brand: Aastra Pages: 461

Brand: Aastra Pages: 40

Brand: Aastra Pages: 47

Brand: Aastra Pages: 47

DECT Elite 9035+1

Brand: Uniden Pages: 68

Brand: Guardian Pages: 16

XDECT 8005WP Series

Brand: Uniden Pages: 12

T-Octophon F 50

Brand: T-COM Pages: 16

Brand: BT Pages: 52

Brand: Panasonic Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands