1
1
- 9
To warm up the system, the power mains must be turned on at least five (5) hours before operation.
STEP 1
To start the air conditioner
Press the operation button (ON/OFF button).
STEP 2
Setting the mode
Press the MODE button to select the mode of your choice.
[
(AUTO), (HEAT), (DRY), (COOL)
or (FAN)]
STEP 3
Setting the fan speed
Press the FAN SPEED selector button to select the fan speed of your choice.
[
(AUTO), (HI.), (MED.)
or (LO.)]
If AUTO is selected, the fan speed switches automatically.
STEP 4
Setting the temperature
Use the
or
button as appropriate to change the temperature setting as desired.
(
reduces the temperature, and
increases the temperature.)
STEP 5
Setting the airflow direction
When more than one indoor unit is connected, the UNIT button is used first to select a
unit. Then use the FLAP button to set the airflow direction to a specific angle or to
sweep. (Refer to the description of the remote control unit.)
STEP 6
To stop the air conditioner
Press the operation button (ON/OFF button) again.
Operation
STEP 1, 6
STEP 3
STEP 2
STEP 4
STEP 5
NOTE
NOTE
(AUTO) and
(HEAT) are used only for heat pump type.
06-212 PAC-i_IM_Sec1 4/12/06 7:15 PM Page 9
