Sanyo 14GX37 Service Manual Download Page 6

Page: 6 / 39

1-3-4. 50/60 output

PORT 50

Pin2(50/60) 0 1

1-3-5. Woofer function when stereo control TA1216AN IC is employed TA1216AN

is provided with woofer control function. If TA1216AN is not used, CPU will

reserve a woofer port to enable woofer control function. Pin36 is used as on/off

control, and Pin4 as woofer volume control output.

PORT

WOOFER ON

WOOFER OFF

Pin36(WOOFER) 0

1-3-6. L/R volume when stereo control IC is not used, simple stereo function can be

selected. Then Pin5 and Pin6 of the CPU can be used as L/R volume output control.

1-3-7. Sensitive receiving output control: in "SETUP" mode, if "SENSITIVITY" is

set to "1", then the function of controlling sensitive receiving tuner is selected, Pin40

is used as control output.

PORT

SENSITIVITY(YUV) ON

SENSITIVITY(YUV) OFF

Pin40 1

1-3-8. Mute control

a). POWER ON/OFF:

POWER OFF POWER ON POWER

OFF

POWER OUT: H L H

MUTE OUT: H L H

b). Besides, MUTE pin also operates when CPU is in automatic mute status or

when the MUTE button on remote control unit is pressed to make CPU

operate in mute status.

2. Automatic identification

2-1. Maximum channels to be stored

Summary of Contents for 14GX37








































Search results

Summary of Contents for 14GX37

Reviews:

Related manuals for 14GX37

Brands by name

Popular brands

Sanyo 14GX37, Service Manual

Search results

Summary of Contents for 14GX37

Reviews:

Related manuals for 14GX37

Brands by name

Popular brands