auto-search is completed.
4 12 PICTURE remote control button
1
)
Function to enter into PICTURE menu.
2
)
Description
After reaching the PICTURE menu press PICTURE button to select, or press
POS /POS to select options upward /downward. The option with an arrow is
the currently selected option. Its OSD is in red. The other options are in green.
Press VOL or VOL to increase or decrease the output values of relevant
options. The bar-like OSD and figures at the bottom of the screen indicate
the current output values of the relevant options. The output value of each
option is divided equally into 100 steps. When the output value of an
option selected is changed, the bar-like OSD will indicate its changing
direction with an arrow. Press VOL+ can increase output value until it
reaches the max (100). Press VOL can decrease the output value until it
reaches the minimum (0).
When the color system is set to AUTO and the input signal is NTSC or forced
NTSC with color, OSD will present TINT option. In other cases there is no
TINT option.
After the values in PICTURE menu are changed, the result will be stored in
EEPROM.
If no operation is performed within 10 seconds, PICTURE menu will quit
automatically.
3
)
OSD display (for about ten seconds)
PICTURE
BRIGHT 100
CONTRAST 100
COLOR 50
SHARP 50
TINT 00
4 13. PP
remote control button
1) Function to set different picture effects.
2) Description:
CPU 's ROM has four set picture effect modes----"STANDARD", "SOFT",
