D-1034-141 SANWA PC520M(E)
5-6 Current Measurement
— 23 —
5-6-1 Current Measurement: 10A
DCA: Maximum rating input value 10ADC
ACA: Maximum rating input value 10AAC
1) Applications
DCA: Current in batteries and DC circuits is measured.
ACA: Current in AC circuits is measured.
2) Measuring ranges
2 ranges for 5.000A, 10.00A
1. Never apply voltage to the input terminals.
2. Be sure to make a series connection via load.
3. When measuring a 3-phase system, special attention should
be paid to the phase-to-phase voltage which is significantly
higher than the phase to earth voltage.
4. Do not apply an input exceeding the maximum rated current to
the input terminals.
5. Before starting measurement, turn OFF the power switch of
the circuit to separate the measuring part, and connect the
test leads firmly.
WARNING
PC520M̲英 06.4.28 3:30 PM ページ 23
