•
D-1034-141 SANWA PC520M(E)
— 24 —
3) Measurement procedure
Connect the plug of black test lead to COM measuring input
terminal and plug of red test lead to A measuring terminal.
Set the function switch to 'A' and select either ' ' or ' '
by pressing the SELECT button.
In the circuit to measure and apply the red and black test
pins in series with load.
For measurement of DCA, apply the black test pin to the
negative potential side of the circuit to measure and the
red test pin to the positive potential side in series with
load.
For measurement of ACA, apply the red and black test
pins to the circuit to measure in series with load.
Apply the red and black test pins to the circuit to measure.
Read the value in the display.
After measurement, remove the red and black test pins from
the circuit measured.
Note:
10A continuous
PC520M̲英 06.4.28 3:31 PM ページ 24
