![Sanuvox R MAX Instruction Manual Download Page 16](http://html.mh-extra.com/html/sanuvox/r-max/r-max_instruction-manual_1198108016.webp)
16
Instruction Manual for R Max
1-888-726-8869
www.sanuvox.com
D. Step by Step Thermistor Bypass
1. Open the R Max ballast box : see step by step instructions of the Ballast Box Opening on page 14 (A).
STEP 2
2. Plug in the R Max to a power source and turn the switch to the ON
position. In the first 5 seconds from powering the unit ON, click the Reset
button once. By doing so, you’ll see “Air flow” appear on the screen.
By clicking again, “Air flow” will disappear from the screen. Once your
selection is made, wait 5 seconds for the setting to be recorded by the
circuit.
WARRANTY
You should first read all instructions before attempting to use this product.
For this warranty to be valid, keep a copy of the proof of purchase.
UV lamp
3 years
Ballast
3 years
Electronic components
3 years
A. This limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to
damage resulting from abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered
manufacturing defects under this warranty.
SANUVOX IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some jurisdictions
do not
allow the exclusion or limitation of incidential or consequential damages or limitation on how long an implied warranty last, so
the above limitations or exclusions may not apply to you. This warranty gives specific legal rights, and you also may have other rights which vary from
jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.
B. At its option, SANUVOX will repair or replace this product if it is found to be defective in material or workmanship.
C. This warranty does not cover damage resulting from any unauthorized attemps to repair or from any use not in accordance with the instruction manual.
D. This warranty does not cover the filters, pre-filters, UV bulbs or other accessories (if included) except for material or workmanship defects.
Call us toll-free at 1-888-726-8869 or email: [email protected]
Please be sure to specify product name.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE
PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE PRODUCT OR TAMPER WITH ITS COMPONENTS YOURSELF.
DOING SO MAY VOID YOUR WARRANTY AND CAUSE PERSONAL INJURY OR DAMAGE TO THE PRODUCT.
CONSUMER RELATIONS
TO ORDER REPLACEMENT PARTS
PLEASE CONTACT YOUR CONTRACTOR OR SANUVOX CONSUMER RELATIONS
Toll-Free Phone #: 1-888-726-8869
Email: [email protected]
Website: www.sanuvox.com
Please be sure to specify product name.
Replacement parts for product
BST120/277GLR
Ballast with multi-voltage input of 120 to 277V (50-60Hz)
LMPHGXJ105
T6 High Intensity Dual Zone (UVC / UVV) 10.5” ‘U’ shaped UV lamp
MSCELC13-2
LCD screen circuit board
MSCTER2
Thermistor
WARNING
: Use only specified SANUVOX branded replacement UV lamps with your unit or system. Use of any other
lamps will void your warranty and can result in damage to the unit, system and/or lamp(s).