10
Instruction Manual for R Max
1-888-726-8869
www.sanuvox.com
MAINTENANCE
How to Replace Lamp(s)
Replacing lamps on the R Max is quick and easy. Simply turn off the power source, remove unit from duct, remove and dispose
of old lamp, replace with new Sanuvox branded UV lamp, replace unit in duct and turn power source back on. See below for
detailed step by step instructions.
CAUTION:
In order to avoid reduced performance of lamp(s), do not touch lamp glass without gloves.
Step by Step Lamp Replacement
1. Take the R Max out from the ductwork by removing the 4 screws located
on the cover (4 corners) that hold it to the frame.
2. Remove the turbulator to access the lamp.
4.
Prepare the new lamp.
Remove the contents from packaging. Only
after you have visually inspected the UV lamp should you break the
security seal on the underside of the cardboard sleeve.
3. Remove the old UV lamp from the lamp socket by opening the retaining
clamp and pulling the UV lamp out of the reflector chamber.
NOTE:
UV lamps can be disposed/recycled after use, as any other
fluorescent lamps. Contact and follow your local and national authorities’
specific instructions.
STEP 1
STEP 2
STEP 4
STEP 3
