8
Instruction Manual for IL COIL CLEAN & ITS VARIOUS MODELS
1-888-726-8869
www.sanuvox.com
1. Insert half of the coupler inside a first support rod.
2. Using a 1/4" hex head self-drilling screw, drill through the support rod
and secure the coupler in place.
3. Insert the other half of the coupler into a second support pipe and secure
it again with a self-drilling screw.
4. The assembly is completed with the coupler tube inside, thus joining
two support rods.
You can now install IL units with longer support rods.
STEP 1
STEP 2
STEP 3
STEP 4
Using the Coupler to Join Multiple 3/4" Support Rods
In the event that the AHU side panels (that supports the IL Coil Clean assembly) are wider than the included 3/4" support rod or
that the installation required multiple IL Coil Clean units, the coupler can be inserted between two or more 3/4" support rods of
3/4" EMT conduit, allowing the support rods to be extended to desired length.
Step by Step Coupler Installation
