10
Instruction Manual for IL COIL CLEAN & ITS VARIOUS MODELS
1-888-726-8869
www.sanuvox.com
MAINTENANCE
How to Replace Lamp(s)
Lamps need periodic replacement to maintain design specifications: replace lamps after 2 years of operation.
Replacing lamp on the IL Coil Clean and its different models is quick and easy. Simply turn off the power source, remove and
dispose of old lamp(s), replace with new Sanuvox branded UV lamp(s), turn power source back on. See below for detailed step
by step instructions.
CAUTION: In order to avoid reduced performance of lamp(s), do not touch lamp glass without gloves.
Step by Step Lamp Replacement
1. Disconnect all power before performing any maintenance or service.
With the power off, remove the lamp from the reflector and unplug it.
2. Release the old lamp from the reflector brackets and remove it.
CAUTION: Use caution when removing and inserting UV lamps from
the metal spring clamps.
3. Use a new UV lamp. Plug in the new lamp and place the rubber tip over
the tip of the lamp.
NOTE:
Always wear cotton gloves when changing the lamp. Also, for
ease of operation, the lamp end with four pins should be pointing in the
direction of the ballast box.
4. Gently press the lamp into the reflector brackets.
Power can now be restored to the IL Coil Clean.
5. Then press on the reset button for resetting lamp timer to zero.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
