Step 7: Add Shelves
Add 4 Shelf Pins (g) for the Isolation Shelf (y) at the desired height as shown in Detailed View A of Diagram 7. Next, align the holes on
the bottom side of the Isolation Shelf with the Shelf pins, and proceed to place the shelf on the Shelf Pins. You can level the Isolation
Shelves by adjusting the Bolt in the Shelf Pin. The nut will hold Bolt in place.
To add the Glass Shelf (x), insert 4 Shelf Pins (g) at the desired height into the Side Panels as shown in the Detailed View B of Diagram
7. Proceed to place the Glass Shelf on the Shelf Pins.
Thread a Bottom Shelf Pin (f) into the Side Panel (t) as shown in Detailed View C of Diagram 7. Repeat process until all four Bottom
Shelf Pins have been inserted into the Side Panel. Proceed to press fit the Bottom Shelf (z) so it is locked into the Bottom Shelf Pins.
Detailed View A
Diagram 7
m
Detailed View B
t
t
Detailed View C
g
t
f
Step 8: Fit Top to assembly
Insert a Dowel (c) into each corner hole in the bottom side of the Top (w). Gently tap the Dowels in. Press fit the Top to the assembly
so the Dowels go into the holes in the corner pillars as seen in the Detailed View of Diagram 8. Make sure the Top is flush with the
corner pillars.
Diagram 8
Detailed View
w
c
corner pillar
