SANTOS : Instruction and maintenance manual
98102 US 5.2 - 03 2011
8 / 16
www.santos.fr
The appliance can only start if the lever (4) is not extending out of the chute to insert the
food (3) and if the drawer catching the food (1) is correctly placed on the slideway (2).
Removing the drawer (1) causes the machine to stop. Re-starting the appliance requires
specific operation of the On / Off switch (5) again (position 1).
A cut in the mains power supply results in the On / Off switch (5) stopping (position 0).
The fact of lifting the lever to add food into the chute (3) causes the motor to stop,
without causing the appliance to stop completely.
Lowering the lever (4) allows the motor to be restarted.
MOTOR OVERLOAD SAFETY FEATURE:
Should the motor become blocked (foreign body, object that is too hard, too much
pressure with the lever on the products being processed), the On / Off switch (5)
automatically trips to the 0 position.
Correct the problem and press the On / Off switch (5) (position 1).
If the problem persists, switch off the power supply to the machine (unplug the cord from
the mains socket) and call in the maintenance service or contact a SANTOS approved
dealer.
MAINTENANCE
Before carrying out any work on the appliance, it must in all cases be unplugged from the
mains power supply and the motor start capacitor discharged:
Discharging the capacitor:
Use a screwdriver with insulated handle to touch the 2 connectors on the
capacitor (12). The appearance of an electric arc shows that the capacitor has
discharged.
Spare parts:
IMPORTANT
:
Use of spare parts other than certified original SANTOS parts is prohibited
This machine requires no specific maintenance. The bearings are lubricated for life.
If work is required to replace worn parts such as start relay or the electric or other
components, refer to the parts list (see exploded view at the end of the manual or which
you can download from our website
www.santos.fr
).
!
