SANTOS : Instruction and maintenance manual
98102 US 5.2 - 03 2011
4 / 16
www.santos.fr
IMPORTANT SAFEGUARDS
When using, cleaning or maintaining the machine, always follow these instructions:
Read all instructions
IMPROPER USE:
1. Do not place food in the channel and press with the plunger before you have
started the machine.
2. Neither a hose nor a pressure hose should be used for cleaning.
3. For electrocution risk protection reasons, never plunge the base into water
or any other liquid.
4. Unplug the appliance before carrying out any work on it: cleaning,
maintenance or repair.
5. The use of spare parts other than certified SANTOS original parts is
prohibited.
ELECTRICAL CONNECTION:
•
The appliance’s power supply is available in 3 voltages:
o
220-240V 50 Hz single phase
o
220-240V 60 Hz single phase
o
100-120V 50/60 Hz single phase
Line protection: The appliance shall be connected only to a power 2-pole + earth
socket supplied by a branch circuit of suitable voltage. The branch
circuit shall have been established by a qualified electrician according
to national and local codes and laws, and provided with suitable
protective equipments (such as fuse, circuit breaker, etc…) as defined
by these codes and laws.
CARE:
•
Before connecting the machine, check that the mains electrical voltage is
the same as the voltage for your appliance. Its value is shown:
either on the identification plate under the machine.
or on the identification plate on the last page of this manual.
•
If the power cable is damaged, it should be replaced by a special assembly
available from approved SANTOS dealers or from SANTOS.
!
Note: You will find it easier to understand the next few paragraphs if you refer to
the diagrams at the end of this manual.
!
