PARALLEL-CONNECTED
SINUS PENTA MODELS
ASSEMBLY
INSTRUCTIONS
17/
24
4.1.4. Signal Connections
The parallel connection of the SINUS PENTA drives requires a control board housed in the master drive. For
the connections related to the control board, please refer to the SINUS PENTA
special cable supplied with the drives to be parallel connected is required.
One or two cables will be supplied, based on the number of drives to be parallel connected.
Do the following to install the signal cable:
•
Remove the main cover from the drives.
Do the following:
•
Remove the keypad and its cablet (fitted on the master drive only).
Remove the top cover:
